Megaplex-210x Ver. 11.2
Megaplex is a flexible, modular multiplexer, enabling the integration of multiple voice, ISDN, video, data and LAN services over multiple E1/T1, Ethernet uplinks or n x 64 links. The Megaplex main links and user ports incorporate, copper, CSU/DSU, LTU and fiber interfaces. New features include:
• New V5.2 "Exchange" Gateway Mode and "End Point" mode update
• Enhanced Ethernet 4-port module
• IEEE C37.94 Fiber Optic data module; specially developed for the Utility market; allows a Fiber Optic connection to the Edge units§
• TDMoIP-compatible main link module
• 6/12 high-speed data channel modules
• VC-4 supports 4 analog voice channels using toll-quality PCM 64 kbps encoding
• Supports three or six OCU?DP (Office Channel Unit - Data Port) channels
• 4/6/12-Channel ISDN "U" Interface Data Modules

Megaplex-2100/2104     Release Note     Manual

ETX-202 Ver. 3.00
ETX-202 is a Gigabit Ethernet intelligent network termination CPE serving as a visible, controllable demarcation point between the user and the operator networks.Equipped with up to two network ports and up to four user ports, ETX-202 performs bridging and VLAN stacking traffic classification and prioritization, as well as end-to-end service monitoring and SLA measurements.
New features include:
• End-to-end Ethernet OAM
• RMON-based statistics

ETX-202    Release Note     Manual

ACE-3K Series Ver. 4.00
The ACE-3K series is a set of multiservice aggregation units, designed for improving the efficiency of Cellular Backhaul and lowering the transport costs.

Version 4.0 of the ACE-3K products introduces a new set of features including Pseudowire, which allows the ACE-3K to be used for delivering cellular traffic over Packet Switched Networks (PSN).

ACE-3100, ACE-3200   Manual
ACE-3400, ACE 3402    Manual
Release Note  

Optimux-34 Ver. 2.00
Optimux-34 is a cost-effective, simple, plug-and-play, compact (19", 1U), manageable E3 copper or fiber optic terminal multiplexer (SFP-based uplinks), combining up to 16 E1 channels and/or up to 32 Mbps Ethernet into a single uplink. The power supply and main link are modular, with optional redundancy. New feature is a 10/100BaseT Ethernet user port with flexible bandwidth (E2/8 Mbps granularity) up to 32 Mbps

Optimux-34     Release Note     Manual

Airmux-200 Ver. 1.620
RAD's new Airmux-200 is a carrier-class, high-capacity, affordable multiplexer connecting E1/T1 and Ethernet networks point-to-point over a wireless link. Compliant with FCC, CAN/CSA and ETSI regulations for licence-exempt transmission, Airmux-200 operates over 5.8 GHz, 5.4 GHz, 5.3 GHz, 4.9 GHz, 2.4 GHz and 2.3 GHz bands.
Three new products are supported by the new SW Version 1.620:
Airmux-200L is a low-price POE link for Ethernet services only that enables improved position versus low-end competitors. The supported frequencies are 2.4 FCC, 2.4 High Power, and 5.8 FCC. The throughput is limited to 2 Mbps full duplex with a maximum range of 20 km.
Airmux-200LC is an Airmux-200L with hardware-ready collocation capabilities. It enables Airmux-200L collocations at a central site using burst synchronization pulses, thus reducing mutual interference. The burst synchronization feature is part of version 1.630 to be released in 12/2006 (SW upgradeable).
Airmux-200 All Indoor combines the IDU and ODU in a single enclosure. It supports 4T1 & ETH with 5.8 GHz FCC and is designed for the US market.

New features include:
• Adaptive Modulation§
• 5 MHz and 10 MHz Channel Bandwidth§
• Increased Frames§ Management

Airmux-200    Release Note     Manual

Optimux-4E1 Ver. 5.00
Optimux-4E1 offers a valuable and effective solution for service extension over fiber optic infrastructures. It is a cost-effective, simple, plug-and-play, compact (1/2 19", 1U), manageable 4 x E1 channel terminal multiplexer, combining 4 E1 channels into a single uplink. Optimux-4E1 has optional two modular uplinks, suitable for a variety of interfaces, including 850 nm multimode laser (VCSEL), 1310 nm and 1550 nm laser (short/long haul, single fiber WDM) and single fiber single wavelength, using SC/APC technology with 1310 nm laser diode. The fiber optic connectors are: ST, SC, FC/PC.

Optimux-4E1     Release Note     Manual